|
I had all intentions to use a 16 tooth front sprocket |
|
ScootRS chain tensioners were fitted |
|
The clutch spider was welded |
With the gearbox in it was time to fit the clutch housing, chain, tensioners and front sprocket. The original plan was to fit a 16 tooth front sprocket but when I tried to fit the original 80 link chain that I thought must have stretched enough over It came apparent I was wrong, so on went the 15 tooth instead. The thing is that turned out to be the right decision in retrospect as I'm not the 11 stone lad I was age 17 and the engine is setup to be much higher revving so if I had got it to fit I now believe it would have made the scooter slower
No comments:
Post a Comment